Made with K10 and K20 grade carbide for clean cutting action and final sharpened with 400 grit diamond wheels for longer cutting life. All with 1/4'' shanks. Includes cutter and all three bearings to cut biscuit slots for 0, 10 and 20 size biscuits. All have baked-on Teflon coating to reduce pitch and resin buildup. With unconditional guarantee!Optional Router Bit Sets Available... Rabbeting Bit Set4-Piece Straight Bit Set Round Over Bit SetIf you are not 100% satisfied with these bits, send them back for a refund.Router Safety Tips:It's easy to prevent mishaps if you take a few simple precautions.1) Rockler recommends using 1/2'' shank router bits whenever possible. 1/2'' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations. -- (Category: Router Bits)

Biscuit Cutter Set Click Here for the price and more information on the vendor's site for this Biscuit Cutter Set. This Biscuit Cutter Set product is carried by a family-run company widely known as "the superstore of woodworking." They have what you're looking for. Product: Main category: Router Bits Name: Biscuit Cutter Set Click Here for my list of similar items. Or Here: Shaping Wood: Tools, Plans and Materials for the main category list. To Previous Similar Item | To Next Similar Item Website Copyright © www.ShapingWood.com 2004 -- all rights reserved.